dmesg - GeForce GTX 1080
Linux version 4.12.0-phx-amdgpudc2 (phoronix@phoronix-X399-AORUS-Gaming-7) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #2 SMP Thu Sep 14 06:04:41 EDT 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000004e444fff] usable
BIOS-e820: [mem 0x000000004e445000-0x000000004e445fff] ACPI NVS
BIOS-e820: [mem 0x000000004e446000-0x000000004e446fff] reserved
BIOS-e820: [mem 0x000000004e447000-0x000000005b21ffff] usable
BIOS-e820: [mem 0x000000005b220000-0x000000005d5a2fff] reserved
BIOS-e820: [mem 0x000000005d5a3000-0x000000005d62cfff] ACPI data
BIOS-e820: [mem 0x000000005d62d000-0x000000005e6adfff] ACPI NVS
BIOS-e820: [mem 0x000000005e6ae000-0x000000005fabffff] reserved
BIOS-e820: [mem 0x000000005fac0000-0x000000005fba1fff] type 20
BIOS-e820: [mem 0x000000005fba2000-0x000000005fbfffff] usable
BIOS-e820: [mem 0x000000005fc00000-0x000000006fffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000049effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0x5d5f8000 ACPI=0x5d5f8000 SMBIOS=0x5fa2f000 SMBIOS 3.0=0x5fa2e000 MPS=0xfcb20 ESRT=0x59010098 MEMATTR=0x58f5d018
SMBIOS 3.0.0 present.
DMI: System manufacturer System Product Name/PRIME X299-A, BIOS 0218 06/01/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x49f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0060000000 mask 7FE0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x5fc00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcdd0-0x000fcddf] mapped at [ffff9e85c00fcdd0]
esrt: Reserving ESRT space from 0x0000000059010098 to 0x00000000590100d0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9e85c0095000] 95000 size 24576
Using GB pages for direct mapping
BRK [0x3ea315000, 0x3ea315fff] PGTABLE
BRK [0x3ea316000, 0x3ea316fff] PGTABLE
BRK [0x3ea317000, 0x3ea317fff] PGTABLE
BRK [0x3ea318000, 0x3ea318fff] PGTABLE
BRK [0x3ea319000, 0x3ea319fff] PGTABLE
BRK [0x3ea31a000, 0x3ea31afff] PGTABLE
BRK [0x3ea31b000, 0x3ea31bfff] PGTABLE
BRK [0x3ea31c000, 0x3ea31cfff] PGTABLE
BRK [0x3ea31d000, 0x3ea31dfff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x32cb1000-0x3564ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000005D5F8000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000005D5F80A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000005D620B98 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000005D5F8210 028988 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000005E6ACF00 000040
ACPI: FPDT 0x000000005D620CB0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000005D620CF8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WSMT 0x000000005D62C588 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000005D620DF0 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000005D621198 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000005D6242F0 0025D9 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000005D6268D0 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: APIC 0x000000005D626908 0000BC (v03 INTEL KBL 00000001 MSFT 0000005F)
ACPI: MCFG 0x000000005D6269C8 00003C (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000005D626A08 000E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000005D627848 0008D6 (v02 INTEL xh_bsf 00000000 INTL 20160422)
ACPI: UEFI 0x000000005D628120 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000005D628168 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000005D629048 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: WDAT 0x000000005D6290E0 000134 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000005D629218 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000005D6294B8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000005D62C4C0 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000005D62C4F8 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: BGRT 0x000000005D62C550 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000049effffff]
NODE_DATA(0) allocated [mem 0x49efd5000-0x49effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000049effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000004e444fff]
node 0: [mem 0x000000004e447000-0x000000005b21ffff]
node 0: [mem 0x000000005fba2000-0x000000005fbfffff]
node 0: [mem 0x0000000100000000-0x000000049effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000049effffff]
On node 0 totalpages: 4170265
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 5770 pages used for memmap
DMA32 zone: 369276 pages, LIFO batch:31
Normal zone: 59328 pages used for memmap
Normal zone: 3796992 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x4e445000-0x4e445fff]
PM: Registered nosave memory: [mem 0x4e446000-0x4e446fff]
PM: Registered nosave memory: [mem 0x5b220000-0x5d5a2fff]
PM: Registered nosave memory: [mem 0x5d5a3000-0x5d62cfff]
PM: Registered nosave memory: [mem 0x5d62d000-0x5e6adfff]
PM: Registered nosave memory: [mem 0x5e6ae000-0x5fabffff]
PM: Registered nosave memory: [mem 0x5fac0000-0x5fba1fff]
PM: Registered nosave memory: [mem 0x5fc00000-0x6fffffff]
PM: Registered nosave memory: [mem 0x70000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x70000000-0xfdffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff9e8a5ec00000 s118936 r8192 d32616 u262144
pcpu-alloc: s118936 r8192 d32616 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4105076
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16219236K/16681060K available (9119K kernel code, 2482K rwdata, 3948K rodata, 2260K init, 2392K bss, 461824K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 36930 entries in 145 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:488 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 4300.000 MHz processor
[Firmware Bug]: TSC ADJUST: CPU0: -697202952 force to 0
Calibrating delay loop (skipped), value calculated using timer frequency.. 8592.00 BogoMIPS (lpj=17184000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170303/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170303/psobject-241)
ACPI Exception: AE_NOT_FOUND, (SSDT: xh_bsf) while loading table (20170303/tbxfload-228)
ACPI Error: 1 table load failures, 8 successful (20170303/tbxfload-246)
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-7740K CPU @ 4.30GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -697202952 CPU1: 0
#2
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -697202952 CPU2: 0
#3
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -697202952 CPU3: 0
#4
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -697202952 CPU4: 0
#5
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -697202952 CPU5: 0
#6
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -697202952 CPU6: 0
#7
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -697202952 CPU7: 0
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (68743.83 BogoMIPS)
sched_clock: Marking stable (636000000, 0)->(683737890, -47737890)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x4e445000-0x4e445fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x5d62d000-0x5e6adfff] (17305600 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:16:54, date: 09/15/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x60000000-0x6fffffff] (base 0x60000000)
PCI: MMCONFIG at [mem 0x60000000-0x6fffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 34 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9E8A4E134000 000840 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9E8A4BC50200 000130 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9E8A4BC53A00 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9E8A4BC4A000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9E8A4BC52400 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x70000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb430000-0xfb43ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xfb44e000-0xfb44efff 64bit]
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb44d000-0xfb44dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xfb448000-0xfb449fff]
pci 0000:00:17.0: reg 0x14: [mem 0xfb44c000-0xfb44c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xfb44b000-0xfb44b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400
pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a2d2] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xfb444000-0xfb447fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xfb440000-0xfb443fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xfb420000-0xfb42ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xfb44a000-0xfb44a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xfb400000-0xfb41ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [10de:1b80] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [144d:a802] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xfb310000-0xfb313fff 64bit]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x30: [mem 0xfb300000-0xfb30ffff pref]
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1b.4: PCI bridge to [bus 03]
pci 0000:00:1b.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1b.4: bridge window [mem 0xfb300000-0xfb3fffff]
acpiphp: Slot [1-1] registered
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfb200000-0xfb207fff 64bit]
pci 0000:05:00.0: PME# supported from D0
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:06:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfb100000-0xfb107fff 64bit]
pci 0000:06:00.0: PME# supported from D0
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [mem 0xfb100000-0xfb1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x4e445000-0x4fffffff]
e820: reserve RAM buffer [mem 0x5b220000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5fc00000-0x5fffffff]
e820: reserve RAM buffer [mem 0x49f000000-0x49fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0x60000000-0x6fffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xfbfe0000-0xfbffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] could not be reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.4: PCI bridge to [bus 03]
pci 0000:00:1b.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1b.4: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x70000000-0xfbffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:05: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:06: resource 1 [mem 0xfb100000-0xfb1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 42620K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x54048000-0x58048000] (64MB) mapped at [ffff9e8614048000-ffff9e8618047fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3deca0b3b47, max_idle_ns: 440795250112 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1505470614.104:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.12.0-phx-amdgpudc2 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.12.0-phx-amdgpudc2 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.12.0-phx-amdgpudc2 xhci-hcd
usb usb3: SerialNumber: 0000:05:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.12.0-phx-amdgpudc2 xhci-hcd
usb usb4: SerialNumber: 0000:05:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.12.0-phx-amdgpudc2 xhci-hcd
usb usb5: SerialNumber: 0000:06:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.12.0-phx-amdgpudc2 xhci-hcd
usb usb6: SerialNumber: 0000:06:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906e9, pf=0x2, revision=0x5e
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 01191aea99c56430a63a653ef46f8bfa5916762e'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 1:923:274
usb usb1-port2: hash matches
tty tty11: hash matches
acpi device:7c: hash matches
memory memory140: hash matches
rtc_cmos 00:04: setting system clock to 2017-09-15 10:16:55 UTC (1505470615)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2260K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1104K
Freeing unused kernel memory: 148K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
hidraw: raw HID events driver (C) Jiri Kosina
wmi: Mapper loaded
ahci 0000:00:17.0: version 3.0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
nvme nvme0: pci function 0000:03:00.0
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb44b000 port 0xfb44b100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xfb44b000 port 0xfb44b180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xfb44b000 port 0xfb44b200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xfb44b000 port 0xfb44b280 irq 42
ata5: SATA max UDMA/133 abar m2048@0xfb44b000 port 0xfb44b300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xfb44b000 port 0xfb44b380 irq 42
ata7: SATA max UDMA/133 abar m2048@0xfb44b000 port 0xfb44b400 irq 42
ata8: SATA max UDMA/133 abar m2048@0xfb44b000 port 0xfb44b480 irq 42
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
nvme0n1: p1 p2
usb 1-7: new high-speed USB device number 2 using xhci_hcd
usb 1-7: New USB device found, idVendor=1a40, idProduct=0101
usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-7: Product: USB 2.0 Hub
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
ata6: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata7: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-10: Crucial_CT525MX300SSD1, M0CR040, max UDMA/133
ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata8: SATA link down (SStatus 4 SControl 300)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Crucial_CT525MX3 R040 PQ: 0 ANSI: 5
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 10:7b:44:4f:1c:f0
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
random: fast init done
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 1-7.4: new high-speed USB device number 3 using xhci_hcd
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Control Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on Syslog Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
clocksource: Switched to clocksource tsc
usb 1-7.4: New USB device found, idVendor=2109, idProduct=2811
usb 1-7.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.4: Product: USB2.0 Hub
usb 1-7.4: Manufacturer: VIA Labs, Inc.
hub 1-7.4:1.0: USB hub found
hub 1-7.4:1.0: 4 ports detected
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd-journald[293]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k SSFS
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
nvidia-nvlink: Nvlink Core is being initialized, major device number 239
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.69 Wed Aug 16 19:34:54 PDT 2017 (using threaded interrupts)
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.69 Wed Aug 16 19:39:44 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3
snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_generic hdaudioC0D0: inputs:
snd_hda_codec_generic hdaudioC0D0: Front Mic=0x19
snd_hda_codec_generic hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_generic hdaudioC0D0: Line=0x1a
asus_wmi: Number of fans: 1
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
audit: type=1400 audit(1505470616.445:2): apparmor="STATUS" operation="profile_load" name="url-dispatcher-bad-url-helper" pid=748 comm="apparmor_parser"
audit: type=1400 audit(1505470616.445:3): apparmor="STATUS" operation="profile_load" name="ubuntu-printing-app" pid=752 comm="apparmor_parser"
audit: type=1400 audit(1505470616.445:4): apparmor="STATUS" operation="profile_load" name="content-hub-clipboard" pid=744 comm="apparmor_parser"
audit: type=1400 audit(1505470616.445:5): apparmor="STATUS" operation="profile_load" name="content-hub-peer-picker" pid=745 comm="apparmor_parser"
audit: type=1400 audit(1505470616.446:6): apparmor="STATUS" operation="profile_load" name="unity8-dash" pid=753 comm="apparmor_parser"
audit: type=1400 audit(1505470616.446:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine" pid=756 comm="apparmor_parser"
audit: type=1400 audit(1505470616.446:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=756 comm="apparmor_parser"
audit: type=1400 audit(1505470616.447:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/mediascanner-service-2.0" pid=751 comm="apparmor_parser"
audit: type=1400 audit(1505470616.447:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=747 comm="apparmor_parser"
usb 1-7.4.3: new full-speed USB device number 4 using xhci_hcd
random: crng init done
usb 1-7.4.3: New USB device found, idVendor=1532, idProduct=0043
usb 1-7.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.4.3: Product: Razer DeathAdder Chroma
usb 1-7.4.3: Manufacturer: Razer
usb 1-7.4.4: new low-speed USB device number 5 using xhci_hcd
usb 1-7.4.4: New USB device found, idVendor=04f2, idProduct=0833
usb 1-7.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7.4.4: Product: USB Keyboard
usb 1-7.4.4: Manufacturer: CHICONY
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.3/1-7.4.3:1.0/0003:1532:0043.0001/input/input11
hid-generic 0003:1532:0043.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-7.4.3/input0
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.3/1-7.4.3:1.1/0003:1532:0043.0002/input/input12
hid-generic 0003:1532:0043.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-7.4.3/input1
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.3/1-7.4.3:1.2/0003:1532:0043.0003/input/input13
hid-generic 0003:1532:0043.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-7.4.3/input2
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.4/1-7.4.4:1.0/0003:04F2:0833.0004/input/input14
hid-generic 0003:04F2:0833.0004: input,hidraw3: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-7.4.4/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.4/1-7.4.4:1.1/0003:04F2:0833.0005/input/input16
hid-generic 0003:04F2:0833.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-7.4.4/input1
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
NVRM: Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-f5126170-0884-78df-050d-4b87b3783f8f) @ PCI:0000:01:00.0
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
kauditd_printk_skb: 26 callbacks suppressed
audit: type=1400 audit(1505470647.928:37): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/tcpdump" pid=2640 comm="apparmor_parser"
EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
warning: process `metro' used the deprecated sysctl system call with 10.1.
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 238